Confused in choosing between Polk Audio PSW125 vs PSW10 subwoofers? The following discussion will inform you the differences between these two models, along with their distinctive pros and cons. Both are bass reflex systems, but they do have different power and performance levels.
Continue reading below if you want to find out more about:
– The size and weight of each subwoofer
– The build quality of each subwoofer
– What input and output options that are available on each model
– The performance of Polk Audio PSW125 vs PSW10
– The warranty information for each model
– Which Polk Audio subwoofer that gives better value for the money
Of course, the very first obvious difference between these two models is their overall dimensions. Being a 12-inch subwoofer, Polk Audio PSW125 is indeed larger and heavier. On the other hand, the 10-inch subwoofer Polk Audio PSW10 is smaller and lighter. See also: Polk PSW505 vs PSW125.
Polk Audio PSW125 measures 16.25 inches wide, 19.13 inches deep, and 16.5 inches tall. The weight is about 40.1 lbs. Because of the larger dimensions, this subwoofer will require more space in your room. This can be a problem if the free space in your room is very limited. Also, this subwoofer is quite heavy, so it is relatively difficult to move around.
Polk Audio PSW10 measures 14 inches wide, 16.125 inches deep, and 14.375 inches tall. The weight is about 26 lbs. This subwoofer makes a great choice if you need a fairly compact and space-friendly unit that can fit easily into a small room. This subwoofer is significantly more lightweight. You won’t find any difficulty when you need to move the unit to a different place.
Design and Build Quality
In terms of design, there are also a few notable differences between PSW125 vs PSW10. Both are bass reflex systems, but the vent placements are different. They are also available in different color options.
Polk Audio PSW125 is available in two variants, one with a gray finish and the other with a faux wood finish. On the front, you can find a 12-inch composite woofer that is covered by a large grille and accented with a gorgeous silver lining. On the rear, there are controls for power, volume, low-pass filter, and phase, as well as several connectors. The power cord is detachable. The subwoofer stands on four solid rubber feet.
The bass vent is located at the bottom. This way, the hole won’t be visible, and the subwoofer appears sleek. Another advantage of the downward-facing port is that the bass vent won’t collect dust. It won’t cause distortion because low frequencies are mostly non-directional. In fact, the downward-facing port greatly helps in improving the bass performance.
For sure, the build quality is good. The housing feels solid, and the grille is durable enough to properly protect the woofer. Not only that; Polk Audio PSW125 is aesthetically pleasing. The gray variant can match easily with various home theater speakers, whereas the faux wood variant looks elegant and makes a nice choice if the other speakers have a wooden or warm color.
Polk Audio PSW10 also has two variants: silver and cherry. Both variants look modern and stylish. However, both variants have a faux wood finish on their side panels. The 10-inch polymer composite driver on the front is accompanied by a front-facing bass vent.
Well, the front-facing port is more prone to catching dust. Some people don’t like seeing the hole, but you can put a cloth grille on the front panel if this is the case. Polk Audio PSW10 also has four rubber feet. On the rear panel, there are also controls for power, volume, low-pass filter, and phase, along with the connectors.
The build quality is also good. The housing is solid and rugged. A cloth grille to cover the entire front panel is included. However, note that the power cord is not detachable. This is a bit annoying when the subwoofer is not in use and you want to store it.
The features of PSW125 vs PSW10 are mostly similar. With either model, you can adjust the output volume, the low-pass filter, and the phase to suit your home theater setup. The low-pass filter knob of each model is continuous, meaning that you can easily get to the right level where the other speakers start producing sound with precision.
The power switch of each model has three positions for on, auto-sensing, and off. In the auto-sensing mode, the subwoofer will automatically turn on when receiving input, but it will turn off when no input is detected. This is perhaps the most convenient solution if you don’t want to flick the power switch manually every time you want to watch a movie or listen to some music.
Polk Audio PSW125 comes with a pair of RCA inputs. In addition, the R input also doubles as the LFE input, which is needed for a surround sound system. So, if you have a surround home theater system, the LFE input can be quite handy. Additionally, has two pairs of speaker level inputs and two pairs of speaker level outputs.
Polk Audio PSW10 also has a pair of RCA inputs. However, it doesn’t have a dedicated LFE input. But this doesn’t mean that you can’t use this subwoofer for a surround system. A simple workaround is by using either the L or R input for the Sub Out connection and turning the low-pass filter clockwise fully, hence creating the equivalent of a dedicated LFE input. There are also two pairs of speaker inputs and two pairs of speaker outputs.
In general, a big subwoofer tends to produce better bass performance than a small unit. Indeed, there are a few other factors to consider, but this is pretty much the case with PSW125 vs PSW10.
With a bigger driver and overall size, Polk Audio PSW125 can easily deliver better bass performance. As a reminder, it is armed with a 12-inch driver, and the amplifier has 150W RMA and 300W dynamic power. The subwoofer is constructed with Klippel Distortion Analyzer to ensure the best and most efficient performance at any volume level.
Polk Audio PSW125 is definitely powerful. It will shake your house with rumbles and explosions from the movie you are watching. Even at high volume levels, the bass performance remains precise, accurate, and convincing without distortion.
On the other hand, Polk Audio PSW10 has a 10-inch driver. The amplifier ‘only’ has 50W RMA and 100W dynamic power. It is definitely powerful enough for filling a small or medium room, but not for a larger setup.
The bass performance of Polk Audio PSW10 is generally tight, accurate, and controlled. It can deliver great rumbles and explosions for immersion. But it will experience some degrees of distortion if you push the volume too high.
When buying a new speaker or subwoofer, it is important to check the warranty information. You don’t want to get a faulty or defective product without being able to claim a suitable replacement. Polk Audio’s warranty is great. The coverage is long enough to ensure that you get a good quality product.
Each subwoofer here is backed a warranty for the speaker and the amplifier. The speaker parts and labor are covered for 5 years, whereas the amplifier parts and labor are covered for 3 years. Note that the warranty will not cover any damage that is caused by user abuse or improper usage.
Pros and Cons of Polk Audio PSW125
To sum it up, here are the pros and cons of Polk Audio PSW125.
– Has a detachable power cord. This allows for easy storage.
– Comes with a dedicated LFE input. So, you can easily integrate the subwoofer into an existing surround sound system.
– Has auto-sensing to turn on and off automatically.
– Better, more powerful bass performance. This subwoofer can easily enhance your entertainment experience with deep, accurate, and realistic low-frequency rumbles.
– Bigger and heavier. More difficult to fit into a cramped room, more difficult to move around.
Pros and Cons of Polk Audio PSW10
Meanwhile, here are the pros and cons of Polk Audio PSW10.
– More compact and lightweight. You can easily fit this subwoofer into your room.
– Can still work for a surround sound system. Although lacking a dedicated LFE input, you can use one of the RCA inputs and turn the low-pass filter clockwise fully in order to make it work for a surround sound system.
– Has auto-sensing to turn on and off automatically.
– The power cord is not detachable. This is a bit annoying for storage.
– Not very powerful. It is only good enough for a small to medium room.
PSW125 vs PSW10
- 12" Composite Bass Driver Delivers Deep, Powerful Bass
- 150w Continuous/300w Dynamic Power Amp
- Slot-loaded Vent Improves Bass Response With Lower Distortion
- Line Level & Speaker Level Inputs
- DOUBLE THE AMPLIFIER POWER TO 100 Watts of Dynamic Power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and - FIT FOR EXTENDED USE
EASY TO INTEGRATE WITH EXISTING SYSTEMS - Hook up this sub to the receiver and upgrade your music sound instantly! Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
- A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a Phase Toggle Switch for a multiple subwoofers, make this sub cohesive and complete
- POWERED SUBWOOFER FOR EXTRA BASS & PUNCH - A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
NOTE : Product prices, availability, ratings and save money information are accurate as of the date/time indicated on post time (as seen right bellow the tittle) and are subject to change. Any price, ratings, availability and save money information displayed on Amazon Site or Headphone Authority at the time of purchase will apply to the purchase of this product.
In general, Polk Audio PSW125 is more recommended. It will give the best value for the money. It comes with a dedicated LFE input, so you can easily integrate it into a surround sound system. In addition, the performance is much better. This subwoofer has impressive, powerful bass.